![]() ![]()
![]() Unfortunately, I can’t write more about this directive, I didn’t have time to look for information. If you do not add the directive normalize "yes", then the sound will be very quiet. #GMEDIARENDER AUDIOSINK AUDIODEVICE MAC#It can be controlled from any OS - clients are under Windows, Linux, Android, ios, mac os, Symbian, therefore it is very convenient.Īll settings are in the file /etc/mpd.confīe sure to change the following directiveīecause it provides the ability to control mpd over the network.Īudio_output There is even an article about the interaction of mpd with Yandex.Music and with Google Music. Easy playing music from the network and from the local collection. Settings options - a lot, for every taste. What is mpd? This is a network daemon player that works fine without a graphical interface and therefore does not load the system. And in my case, it was just mpd and mpc (the client for mpc works in the terminal). #GMEDIARENDER AUDIOSINK AUDIODEVICE INSTALL#Once the audio output is configured, you can begin to install something useful. You can, however, just run after a reboot.īut I like the rest of the tuning for radio. If the radio has played, then everything is in order. I advise you to check after this - perform a reboot first # ** Overclock to 1.728 GHz #echo 1728000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq echo 0 > /proc/sys/kernel/hung_task_timeout_secs dmesg -n 1 alsactl restore exit 0 # In order to enable or disable this script just change the execution # bits. # Make sure that the script will "exit 0" on success or any other # value on error. #!/bin/sh -e # rc.local # This script is executed at the end of each multiuser runlevel. In rc.local so that the parameters are restored automatically: The current state will still be reset after a reboot, because we add lines Turn on the audio line out (the desired switch is in the center), to do this, move the arrows five positions to the right and press m ![]() We connect via SSH (if the standard login-password is not changed, then this is the root orangepi).īy default, the sound is turned off, so to turn it on, do the following: I bought the second orange already in a set with a case and an expansion card, I regretted that I didn’t do that from the very beginning. If you choose to buy a board, you will save time and effort, and there will immediately be a mini-jack jack, two more USB connectors, an infrared sensor and a microphone. #GMEDIARENDER AUDIOSINK AUDIODEVICE MANUALS#Most likely, there are two reasons - my bad work + food is brought right to the board, and not through microUSB.īecause the photo board, soldering and manuals will not be, if needed - easily located on the network. I advise this method, because on my homemade board the interference affects the sound of the speakers (in particular, when sending a large print job to the printer, or when installing large packages). There is nothing complicated, and I will say straight away: there is no special point in doing this - it is easier to buy a ready-made expansion card. I took a bare fee, so everything had to be soldered by myself. ”It is said - done.įor a start, it was necessary to connect the jack to the jack with an orange. “It would be great to hang such a server on an orange, which could receive audio stream from a smartphone via WiFi,” I thought, “because it is constantly connected via ethernet to the router, lightly loaded (as Ubuntu Server 16.04 costs on it), you can conveniently place electricity consumes little. But this means a short range and playing music only on the device with which the phone is connected via bluetooth. #GMEDIARENDER AUDIOSINK AUDIODEVICE BLUETOOTH#You can, of course, buy bluetooth speakers. And the machine itself is old (10 years already), an extra audio player - an extra load. I also have a laptop so that it would be inconvenient to connect a cable to the speakers to it. A telephone that always hangs on a lineman is no longer a mobile phone, but something similar to old wired devices. They cost well, comfortable, and carry them reluctance. Once I got tired of always connecting my phone to the speakers via minijack. I really didn’t want to have an extra wire from the laptop to the printer, and as a result, the orange was extracted, configured and works since then as a CUPS server via USB (the result, by the way, is good, but that's another story). For some time she was lying idle until they gave me an old Canon MX320 multifunction printer without network support. A friend almost immediately abandoned the proposed project, but I ended up with an OrangePi Zero board purchased. I have long wanted to work with any single-server * Pi and therefore immediately decided to do something similar (result + experience). My story began with the fact that at the request of one friend it was necessary to make a small programmable device with audio output and GPIO. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |